CONscan series Waterproof Pocket Conductivity Tester

 

CONscan series pocket conductivity tester  includes models 20,  30, 40 for measuring the electrical conductivity of water, these meters without  temperature compensation function.

　

The user need to select the different meters for measuring the sample according to its conductivity range,  the rule as follows: CONscan20 meter used for measuring the conductivity of pure water, CONscan30 meter used for measuring the conductivity of general liquids, e.g tap water, rainwater. CONscan40 meter used for measuring the conductivity of high conductivity liquids.

　

Platinum Sensor

CONscan series tester use a standard platinum sensor for fast and reliable measurement. Replaceable sensor design easy for maintenance.
　

Single Point Calibration

The  testers allows user to use customized calibration solution. You can set the known conductivity values on the tester and immerse the sensor into conductivity calibration solution, press CAL key and the tester is automatically calibrated.

　

Hold Function

During the measurement, press the HOLD key, the testers will freeze the reading momentarily on the display for easy viewing or recording.

　

Auto-Power Off

The testers will automatically power down  8 minutes after  the last key press. This function is helpful to save battery. It can also be turned off manually.

　

Waterproof Feature

O- ring seals on the screw - tight battery and  sensor compartments prevent  water damage even if fully immersed. If the tester sink into the water, it will float automatically.

 

 

Bante5 series Portable Conductivity/TDS/Salinity/C Meter

 

Bante 5  series  portable meters  includes  models  520,  530,  540.

The meters used for measuring the conductivity, TDS, salinity in

liquids.

 

Automatic Calibration

The meters is capable of calibrating the one point in each of the

measuring ranges.  From Setup Menu, choose calibration and

press the key to set known conductivity values, immerse the

conductivity cell  into calibration solution, press ENTER key and

meter is automatically calibrated.

 

Calibration Solution Recognition

During the calibration, if the calibration solution does not match

the meter’s indicated value, an ERROR message is displayed.

This function will prevent an inaccurate calibration.

　

Auto-Ranging

Bante 5  series  portable  meters  have auto-range functions for

measuring  conductivity and  total dissolved solids (TDS). Upon

immersing conductivity sensor into sample solution, the screen

immediately  displays  the  reading  in appropriate  measurement

range for accuracy.

　

Adjustable Temperature Coefficient

Various ions may have different temperature coefficients, The

meters can set the temperature coefficient between 0 and 3.9

% in degrees Centigrade for optimum accuracy.

　　

Adjustable Cell Constant

The meters have 3 cell constants for measuring requirements. Once

a cell constant has its calibration set, it is saved and does not require

re-calibration when switching sensors.

　

Adjustable TDS Coefficient

Bante 530 and 540 meters can manually adjustable TDS coefficient

between 0.01 and 1.00 to ensure optimum measurement  accuracy.

　

Automatic Temperature Compensation

The  meters  provide manual  or automatic  temperature  compensation

mode for optimum accuracy under variable temperature conditions.

Insert  the temperature probe into meter, the temperature value will 

automatically displays on the screen.

DDS-W series Benchtop Conductivity Meter

 

DDS-W series conductivity meters are an easy-use basic meter used for measuring the conductivity of water. The series meters includes model DDS-11AW, DDS-307W and DDS-12DW.

　

Automatic Calibration

The meters can calibrate 1 point in each of  the measuring ranges. From Setup Menu, choose calibration and immerse the electrode into standard calibration solution, press ENTER key and meter is automatically calibrated.

　

Auto-Ranging

The meters have auto-range function for measuring conductivity. Upon immersing conductivity cell into sample solution, the meter will immediately displays the values in appropriate measurement range for accuracy.

 

Adjustable Temperature Coefficient

Various ions may have different temperature coefficients, The meters can set the temperature coefficient between 0.0 and 3.9% in degrees Centigrade for optimum accuracy.

　

Adjustable Cell Constant

The meters have 3 cell constants for measuring requirements. Once a cell constant has its calibration set, it is saved and does not require re-calibration when switching sensors.

　

Automatic or Manual Temperature Compensation

The meters provides manual  or automatic  temperature compensation mode for optimum accuracy under variable temperature conditions.

　

Fluid Resistant Housing and Swivel Electrode Holder

The integrated plastic housing and keypad is sealed to protect against accidental spills. The electrode holder arm is rapidly switched to both sides and  swivels and articulates for convenient use and positioning.

 

Meter Included:

Conductivity Cell, Temperature Probe (Only for DDS-12DW),

Power Adapters.

Copyright ® 2012 Crea Laboratory Technologies Pty Ltd