PHscan series Waterproof Pocket pH Tester

 

PHscan series pocket pH tester includes  models 10, 20, 30 for the measurement of acidity and alkalinity in liquids. These testers are designed for outdoor applications,  especially waste water treatment and environmental monitoring.

　

Automatic Calibration

The testers allows up to 2 points calibration. Press the CAL key and  the screen will  shows the standard buffer pH needed for calibration. Immerse the pH electrode into the calibration solution as indicated and press CAL key. The tester is now automatically calibrated.

　

Automatic Temperature Compensation

PHscan 30 tester with a temperature sensor, press the temperature key, the meter will shows current temperature values. Automatic Temperature Compensation provides  highly accurate  measurement over the entire pH ranges.

　

Replaceable Electrode Design

Generally, the pH electrode' s effective life is one year, if you use it more than this time,

the measured value   possible produced offset, it will serious influence the measurement accuracy of tester. PHscan series  tester has a double-junction sensor,  you can easily replace the new electrode.

　

Meter Included:

Standard pH Buffers, Batteries

Optional Accessory: Carrying Case

Bante2 series Portable pH/mV/ORP/C/F Meter

 

Bante2 series portable meters includes models 220, 221, which

used for measuring the acidity and alkalinity or Oxidation-

Reduction Potential of liquids.

 

Automatic Calibration

The meters is capable of calibrating up to 3 points using USA or

NIST pH standard buffer. From Setup Menu, choose calibration

and  immerse pH electrode into indicated pH calibration solution,

press the ENTER key and meter is automatically calibrated.

 

Auto-Buffer Recognition

During calibration, if the calibration solution does not match the

meter’s indicated value, an ERROR message is displayed. After

calibration,  the percentage  slope of  the electrode  is displayed

before  the meter returns  to measurement  mode.

Per the electrode slopes,  you can decides whether to replace

the pH electrode.

　

Automatic Temperature Compensation

The meters provide manual  or automatic  temperature  compensation

mode for optimum accuracy under variable temperature conditions.

Insert  the temperature probe into meter, the temperature value will

automatically displays on the screen.

 

Message Indicator

Bante 2  series meters have message indicator, it can shows many

helpful messages like an on-screen manual for easy operation.

  

Meter Included:

pH Electrode, ORP Electrode(Only for Bante221 meter), Standard

pH Buffers, Temperature Probe, Battery.

Optional Accessory: Carrying Case.

 

 

Bante90 series Multiparameter Water Quality Meter

 

Bante 90 series multiparameter water quality meter is designed

for high performance and easy operation, with 4 models can be

choose from per your requirements. The meters are capable of

measuring up to 8 water quality parameters, including pH, ORP,

Ion, Conductivity, TDS, Salinity, Resistivity, DO and temperature.

　

Multi-point Push-button Calibration

The meters have multi-point calibration mode. From setup menu,

choose calibration and immerse electrode sensor into indicated

calibration solution, press ENTER key and meter is automatically

calibrated. 

　

Auto-Buffer Recognition

During calibration, if the calibration solution does not match the

meter’s indicated value, an ERROR message is displayed.

　

Viewing of Electrode Slope

After pH or ion calibration, the percentage slope of the sensor

is displayed before the meter returns to measurement mode.

Per the slope value, user decides whether to change electrode.

　

Automatic Temperature Compensation

The meters provide automatic temperature compensation mode

for optimum accuracy under variable temperature conditions.

Insert  the temperature probe into meter, the temperature value

will automatically displays on the screen.

　

Ion Concentration Measurement

Bante 900 meter has 13 types of ion measurements to choose.

From the setup menu select the desired Ion type and press the

ENTER key. The pX value is displayed, Use ENTER key again to

switch between pX, ppm, mg/L values.

　

Auto-Ranging

During  the conductivity mode, the meters have auto-range functions

for measuring conductivity and  total dissolved solids (TDS).

Upon immersing conductivity sensor into sample solution, the screen

immediately  displays the reading  in appropriate  measurement  range

for accuracy.

　

Adjustable Temperature Coefficient

Various ions may have different temperature coefficients, The meter

can set the temperature coefficient between 0 and 3.9% in degrees

Centigrade for optimum accuracy.

　

Adjustable Cell Constant

The meters have 3 cell constants for measuring requirements. Once

a cell constant has its calibration set, it is saved and does not require

re-calibration when switching electrodes.

　

Adjustable TDS Coefficient

Bante 90 meters are capable of manually adjustable TDS coefficient

between 0.01 and 1.00  to ensure optimum measurement accuracy.

　

Measurement Modes of Meters

● Bante 900: pH/ORP/Ion/Conductivity/TDS/Salinity/Resistivity/DO

● Bante 901: pH/ORP/Conductivity/TDS/Salinity/Resistivity

● Bante 902: pH/ORP/DO

● Bante 903: Conductivity/TDS/Salinity/Resistivity/DO

 

 

Copyright ® 2012 Crea Laboratory Technologies Pty Ltd