



Bante90 series Multiparameter Water Quality Meter
Bante 90 series multiparameter water quality meter is designed
for high performance and easy operation, with 4 models can be
choose from per your requirements. The meters are capable of
measuring up to 8 water quality parameters, including pH, ORP,
Ion, Conductivity, TDS, Salinity, Resistivity, DO and temperature.
Multi-
The meters have multi-
choose calibration and immerse electrode sensor into indicated
calibration solution, press ENTER key and meter is automatically
calibrated.
Auto-
During calibration, if the calibration solution does not match the
meter’s indicated value, an ERROR message is displayed.
Viewing of Electrode Slope
After pH or ion calibration, the percentage slope of the sensor
is displayed before the meter returns to measurement mode.
Per the slope value, user decides whether to change electrode.
Automatic Temperature Compensation
The meters provide automatic temperature compensation mode
for optimum accuracy under variable temperature conditions.
Insert the temperature probe into meter, the temperature value
will automatically displays on the screen.
Ion Concentration Measurement
Bante 900 meter has 13 types of ion measurements to choose.
From the setup menu select the desired Ion type and press the
ENTER key. The pX value is displayed, Use ENTER key again to
switch between pX, ppm, mg/L values.
Auto-
During the conductivity mode, the meters have auto-
for measuring conductivity and total dissolved solids (TDS).
Upon immersing conductivity sensor into sample solution, the screen
immediately displays the reading in appropriate measurement range
for accuracy.
Adjustable Temperature Coefficient
Various ions may have different temperature coefficients, The meter
can set the temperature coefficient between 0 and 3.9% in degrees
Centigrade for optimum accuracy.
Adjustable Cell Constant
The meters have 3 cell constants for measuring requirements. Once
a cell constant has its calibration set, it is saved and does not require
re-
Adjustable TDS Coefficient
Bante 90 meters are capable of manually adjustable TDS coefficient
between 0.01 and 1.00 to ensure optimum measurement accuracy.
Measurement Modes of Meters
● Bante 900: pH/ORP/Ion/Conductivity/TDS/Salinity/Resistivity/DO
● Bante 901: pH/ORP/Conductivity/TDS/Salinity/Resistivity
● Bante 902: pH/ORP/DO
● Bante 903: Conductivity/TDS/Salinity/Resistivity/DO


Copyright ® 2012 Crea Laboratory Technologies Pty Ltd
Bante8 series Portable Dissolved Oxygen Meter
Bante 8 series portable meters uses polarographic electrode to measures dissolved
oxygen in water, it can shows the oxygen level as % saturation from 0 to 200% or
concentration from 0 to 20mg/L.
Automatic Calibration
The meters can be calibrated at one or two points -
Salinity and Barometric Pressure Compensation
Salt dissolved in solution will be limits oxygen content, Bante 8 series DO meters
are capable of compensates the salinity and barometric pressure after manual input
coefficients.
Multi-
The meters can shows various temperature and concentration units to meet users requirements. For example: mg/L and ppm, kPa and mmHg, Celsius and Fahrenheit.
Automatic Temperature Compensation
DO probe with a globular shape temperature sensor, it can provides automatic temperature compensation to ensure accurate measuring value.
Communication Interface and Data Store
The meters have real-
to 48 data sets. Press the SAVE key to store the current measured
values and it automatically generates a serial number with time. All
of stored data can then be sent to a computer via the USB port.
Meter Included:
DO Probe, DO Membrane Kit, DO Electrolyte Solution, Battery.
Optional Accessory: Carrying Case.
